Solar Charger Inverter
Main Features:
-
Pure sine wave max 5000w output
-
Max 80A MPPT solar charger (max 5kw PV array)
-
Max 450Vdc input
-
HYBRID Grid-Tie / Off Grid SOLAR inverter for 48V system
-
Parallel support up to 9 units Parallel card Included
-
Work with 48V battery
-
Total system max charging: 80A
-
Bundled monitoring & setting software
-
Supports 50hz or 60hz (program adjustable)
-
Grid feedback when there is excess energy
-
USB interface available
-
Able to use ac grid or generator power
-
Timer setting for AC charging & output now available
- Wifi Support (not include)
Notified:
1. Because this inverter is non isolated, only three types of PV modules are acceptable: single crystalline, poly crystalline with class A rated and CIGS modules.
To avoid any malfunction, do not connect any PV modules with possible current leakage to the inverter. For example, grounded PV modules will cause current leakage to the inverter. When using CIGS modules, please be sure NO grounding.
|
Model |
BGH-5KW |
|
Max.PV Array Power 5000W |
5000W |
|
Rated Output Power |
5000W |
|
Maximum PV Array Open Circuit Voltage |
450VDC |
|
MPPT Range @Operating Voltage |
120 VDC~430 VDC |
|
MPPT Tracker Number |
1 |
|
GRID-TIE OPERATION |
|
|
GRID OUTPUT(AC) |
|
|
Nominal Output Voltage |
220/230/240 VAC |
|
Output Voltage Range |
184-264.5VAC or 195.5-253VAC (Selectable) |
|
Nominal Output Current |
21.7A |
|
Power Factor |
>0.99 |
|
EFFICIENCY |
|
|
Maximum Conversion Efficiency (DC/AC) 95% |
|
|
OFF-GRID, HYBRID OPERATION |
|
|
GRID INPUT |
|
|
Acceptable Input Voltage Range |
90-280VAC or 170-280VAC |
|
Frequency Range |
50Hz/60Hz(Auto sensing) |
|
Maximum AC Input Current |
40A |
|
BATTERY MODE OUTPUT(AC) |
|
|
Nominal Output Voltage |
220/230/240/VAC |
|
Output Waveform |
Pure Sine Wave |
|
Efficiency (DC to AC) |
93% |
|
BATTERY & CHARGER |
|
|
Nominal DC Voltage |
48VDC |
|
Maximum Solar Charge Current |
80A |
|
Maximum AC Charge Current |
80A |
|
Maximum Charge Current |
80A |
|
GENERAL |
|
|
PHYSICAL |
|
|
Dimension, D*W*H(mm) |
120*295*468 |
|
Net Weight (kgs) |
12KG |
|
INTERFACE |
|
|
Parallel Function |
Yes,9 Units |
|
Communication Ports |
USB, RS-232 and dry contact |
|
ENVIRONMENT |
|
|
Humidity |
0~90%RH(Non-condensing) |
|
Operating Temperature |
-10℃ to 50℃ |
Q&A
1. Can this inverter be parallel? Yes, max 9 units
2.What is The PV range of this inverter?120-450v
3.It supports Wifi? yes, but default not with wifi plug
4.Have dry contact function? Yes
5. Can it work without battery? Not supported
6.Is it an hybrid inverter can feed back power to grid? Yes
2.Before connecting to AC in put power source , please install a separate AC breaker between inverter and AC input power source.This will ensure the inverter can be securely disconnected during maintenance and fully protected from over current of AC input. The recommended spec of AC breaker is 16A for 1.5KW and 32A for 3KW and 5 0A for 5KW;
There are two terminal blocks with “IN” and “OUT” markings. Please do NOT mis connect input and output connectors.S
